Serving the San Antonio area  ·  (830) 429-5826  ·  Open Mon-Sat 7am-6pm
📞 (830) 429-5826 Free Quote

Spray Foam Insulation in Kirby, TX (78219) · Local Professionals

San Antonio Spray Foam Insulation · Fast response in Kirby and the San Antonio area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+38Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Kirby's older ranch homes sit on slab foundations just south of San Antonio, facing the same brutal summer heat that drives cooling bills across Bexar County. Your attic is the problem, and we fix it.

When a Kirby homeowner calls us, it is usually because the upstairs is too hot to live in, the air conditioning runs all day and the electric bill has become unaffordable, or humid air is leaking in around the ceiling line. We have been serving Kirby and the surrounding San Antonio area since 2009 with spray foam insulation and air sealing that stops the heat gain and the moisture before they reach your living space. A written estimate with R-value and thickness specs, honest pricing, and a crew that shows up and cleans up. That is how we work.

Spray Foam Insulation in Kirby (78219)

Kirby's housing stock is mostly mid-century ranch homes built on slab-on-grade foundations, with vented attics that bake under the long Central Texas summer. Ductwork often runs exposed through the attic floor, pulling heat gain straight into your conditioned space below. The attic itself has thin or settled insulation that was never matched to the summer load, and by July the temperature under the roof can exceed 140 degrees. That heat radiates downward through the ceiling all day, and the HVAC system has to fight it constantly. Humidity is the second problem. In climate zone 2A, hot and humid, moisture-laden outside air works inward through walls and roof decks for much of the year, especially where there is no air sealing at the rim joists, band joists, or top plates. Old insulation does nothing to stop it. Spray foam insulation, installed correctly in the attic and sealed at the rim and band joists, stops both the heat and the moisture.

We have been installing spray foam insulation in Kirby and across the San Antonio area since 2009. Our crews are fully insured, familiar with the local building stock, and trained to deliver the thickness and R-value your attic actually needs, specified in writing before the work begins.

Our services in Kirby

How a Job Works in Kirby

Step 1: We schedule a free on-site assessment at your Kirby address. We measure the attic floor, check what insulation is already there, look for air leaks at the rim joists and band joists, and ask about your cooling bills and comfort issues. If we see moisture damage or a roof leak, we tell you plainly that the foam does not go in until that is fixed. We then provide a written estimate with the R-value and thickness we recommend, the area to be sprayed, and the price.

Step 2: On the day of the work, our crew sets up mechanical ventilation in the attic to manage fumes during the spray. We mask off any areas that should not be foamed, apply the closed cell or open cell foam to the specified thickness in passes, and allow proper cure time. If your home is occupied, we establish a re-entry window of 24 to 48 hours before the attic is used again. We coordinate around any existing HVAC work or roofing, and if old insulation has to be removed first, we handle that as a separate scope.

Step 3: Once the foam has cured, we do a final walkthrough with you, verify the thickness and coverage, and leave the property clean. You will see the difference in your cooling bills and comfort within the first month of operation.

Attic spray foam insulation in Kirby typically starts at $1.50 per square foot for open cell foam, or $1.20 per board foot for closed cell, depending on the thickness and R-value required. A typical single-story Kirby ranch home with 1,200 to 1,500 square feet of attic floor runs between $1,800 and $2,800 for full attic coverage, plus any air sealing at the rim and band joists (starting at $650). If old insulation must be removed first, add $950 and up depending on the volume. Wall injection foam for closed cavities runs from $2 per square foot. Crawl space foam starts at $2,500. The actual price depends on the area to cover, the R-value and thickness specified, whether you choose open cell or closed cell, and what has to be removed or sealed before we spray. We provide a detailed written estimate at no charge. Call us at (830) 429-5826 to schedule your free assessment in Kirby.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Kirby and nearby areas.

Why does my upstairs bedroom stay hot in summer even though the air conditioning is running?
Your attic is uninsulated or under-insulated, and the heat is radiating straight down through the ceiling. Vented attics in Kirby routinely exceed 140 degrees in July, and that heat finds its way into your living space. Spray foam applied to the underside of the roof deck (a sealed attic) stops the heat before it radiates downward, and it also seals the air leaks around the ceiling line where humid outside air sneaks in. Most Kirby homeowners see a noticeable difference within the first month of cooling season.
I see moisture stains on my attic framing and the insulation smells musty. Can you spray foam over it?
No. We fix the moisture problem first or we walk away. If there is active moisture, condensation, or a roof leak, the substrate has to be dry before any foam goes down. That might mean fixing a roof leak, improving attic ventilation, or running a dehumidifier to dry out the space. Once it is dry and the source is stopped, we spray. Moisture damage and mold growth are not something we remediate, so if there is significant damage, we refer you to a qualified professional. Call us at (830) 429-5826 and we will walk you through what we see.
What does attic spray foam cost for a typical Kirby home?
A single-story ranch in Kirby with 1,200 to 1,500 square feet of attic typically runs $1,800 to $2,800 for full attic coverage with open cell foam, or $2,400 to $3,500 for closed cell. The price depends on the R-value and thickness specified, the area to cover, and whether old insulation has to be removed first. We always provide a written estimate with exact R-value and thickness specs before any work begins. Call (830) 429-5826 for a free on-site assessment.
Who sets the R-value and thermal barrier requirements for spray foam in Kirby, and do I need a permit?
Kirby has its own building department, and they enforce the energy code and building code in effect at your address. R-value requirements, ignition barriers, and thermal barriers are governed by that code, not by us. Permitting varies from city to city across Greater San Antonio, and there is no reciprocity between Texas cities. Before any work begins, ask your local building department in Kirby what permits apply to spray foam insulation at your property, and ask any contractor for proof of the registration your city requires. We help you navigate what applies at your address.
Can we stay in the house while the attic is being sprayed?
Yes. We set up mechanical ventilation during the spray to manage fumes, and we establish a re-entry window. Most spray foam is low-VOC once cured, but the attic itself should not be occupied for 24 to 48 hours after the work is complete. If you have young children, pets, or anyone with respiratory sensitivity, plan to stay elsewhere for that period or keep those areas of the home closed off. We will give you a clear timeline when we arrive.
Are you fully insured for spray foam work in Kirby?
Yes. We carry general liability and workers' compensation insurance for all spray foam insulation and air sealing work. Before any contractor starts work at your Kirby property, always ask to see proof of current insurance and verify that it covers the scope of work you have agreed on.
When should I plan spray foam insulation work in Kirby, summer or winter?
Spray foam can be installed year-round in San Antonio, but the best time to plan is late spring or early fall, when temperatures are moderate and humidity is lower. Many Kirby homeowners wait until late summer when the cooling bills arrive, but by then it is often 100 degrees outside and the attic is unbearable to work in. If you are planning attic foam, call us now at (830) 429-5826 to schedule before the summer heat peaks. If you wait until August, the job will take longer and cost more because of the heat. Winter is also a good time, and the work is usually faster.
Why choose us?

Trusted professionals since 2009

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in San Antonio

All your work handled by qualified professionals in San Antonio

Attic Spray Foam Insulation

Attic foam built for San Antonio's long cooling season

Included in your service

  • Open cell fill sized for Stone Oak attic trusses
  • Sealed against humid air pulled into vented Alamo Heights attics
  • Ductwork runs covered to ease Bexar County summer loads
  • Attic access and soffit vents detailed for San Antonio homes
Learn more→

Closed Cell Spray Foam Insulation

Closed cell strength for Bexar County walls and additions

Included in your service

  • High-density foam rated for Hill Country moisture swings
  • Applied in passes to protect slab-on-grade additions
  • Used at rim joists in Monte Vista bungalow retrofits
  • Vapor-resistant barrier for Comal County humid summers
Learn more→

Open Cell Spray Foam Insulation

Open cell fill for San Antonio walls and attic framing

Included in your service

  • Expanding fill for odd stud bays in Leon Valley ranches
  • Sound-dampening layer for rooms over garages near Helotes
  • Installed to the attic floor in vented San Antonio attics
  • Fitted around wiring in older King William wall cavities
Learn more→

Wall & Injection Foam Insulation

Wall injection foam for Monte Vista and King William bungalows

Included in your service

  • Small holes drilled between studs in Alamo Heights homes
  • Foam injected to fill gaps in pier-and-beam wall cavities
  • Patched and matched siding on older King William bungalows
  • Targets uninsulated walls common in Monte Vista construction
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for King William and Monte Vista pier-and-beam homes

Included in your service

  • Foam applied to crawl space walls under pier-and-beam floors
  • Band joists sealed against Bexar County ground moisture
  • Vapor barrier laid over exposed soil in older crawl spaces
  • Access points closed up in Monte Vista and King William homes
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist sealing for San Antonio's humid year-round climate

Included in your service

  • Spray foam sealing rim joists in Stone Oak subdivisions
  • Sill plates closed against Bexar County humid air intrusion
  • Band joist gaps filled in mid-century ranch additions
  • Floor framing sealed in slab-on-grade and pier homes alike
Learn more→

Garage Spray Foam Insulation

Garage and bonus room foam for San Antonio's hot west-facing walls

Included in your service

  • Ceiling foam under bonus rooms in Stone Oak subdivisions
  • Shared garage walls sealed in mid-century San Antonio homes
  • Overhead door perimeter sealed against summer heat gain
  • Attic access above garages treated in Helotes area builds
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for Bexar County shops and barndominiums

Included in your service

  • Interior wall and ceiling foam for Bexar County metal shops
  • Condensation control for barndominiums near Helotes and Converse
  • Foam applied to purlins in Wilson County metal buildings
  • Moisture barrier for shops across Guadalupe County
Learn more→

Commercial & New Construction Spray Foam

Commercial and new construction foam across Bexar and Comal counties

Included in your service

  • Attic and wall foam coordinated with builders in Stone Oak
  • Metal shell insulation for new shops across Comal County
  • Scheduling built around San Antonio framing timelines
  • Site visits across Bexar and Guadalupe County job sites
Learn more→

Insulation Removal

Old insulation removal for San Antonio attics and crawl spaces

Included in your service

  • Pulled from vented attics above Alamo Heights bungalows
  • Cleared from crawl spaces under pier-and-beam homes
  • Hauled away after Hill Country storm or pest damage
  • Attic floor vacuumed clean before San Antonio re-insulation
Learn more→

Insulation Replacement & Re-Insulation

Insulation replacement for San Antonio's aging attics and ranch homes

Included in your service

  • Old fiberglass swapped for foam in Leon Valley ranches
  • Attic floor re-insulated to handle San Antonio summer heat
  • Wall cavities refreshed in older Monte Vista construction
  • Ductwork re-covered after removal in vented attics
Learn more→

Air Sealing

Air sealing for San Antonio homes fighting humid stack effect

Included in your service

  • Top plate gaps sealed in older Monte Vista bungalows
  • Attic bypasses closed against humid San Antonio summer air
  • Penetrations sealed around ductwork in vented attic spaces
  • Blower door tested in homes across Bexar County
Learn more→
Verified client reviews

38+ Verified Client Reviews in San Antonio

⭐⭐⭐⭐⭐ 4.9/5 · 38 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in San Antonio · Response within 24h · No commitment · ☎ (830) 429-5826

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in San Antonio ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm